Follow these easy steps to get your Electrolux FAVORIT 88050 i Dishwasher up and running in no time.
Prior to using the dishwasher for the first time, remove all the clips with which the dish racks are secured for transport.
Set the water softener manually or electronically to the desired water hardness level to ensure optimal washing results.
Ensure the dishwasher is installed on a firm, level floor. Adjust the threaded feet to compensate for any unevenness in the floor and to match the height of surrounding units.
Ensure the nominal voltage and type of supply on the rating plate match the supply where the appliance is to be installed. Verify that the fuse rating is also correct.
Ensure the drain hose, inlet hose, and mains cable are not kinked or crushed. Secure the drain hose with an elbow to prevent it from sliding off the wash basin.
Before using the dishwasher for the first time, add special salt to the salt container. If using detergent that includes special salt, this step may not be necessary.
Add rinse aid to the compartment inside the dishwasher door, especially if using detergent and rinse aid separately.
Load cutlery and dishes into the dishwasher, ensuring the spray arms can rotate freely. Fill with dishwasher detergent as appropriate for the selected cycle.
Press the ON/OFF button to activate the dishwasher. Select a wash programme suitable for the load, then start the wash programme. The selected cycle will begin after approximately 3 seconds.